Synthetic Base Oils
-
Water-ethylene glycol fire resistant hydraulic fluid
Water-ethylene glycol fire resistant hydraulic fluid:
Excellent dynamic lubrication performance, providing good oil film strength.
Excellent shear resistance and good mutual solubility with rubber.
High viscosity index provide viscosity-temperature characteristic.
High clarity light liquid provides excellent transparency accessories.
High lubricity meets the general requirements of low-middle pressure system.
Unique structure provides excellent shear resistance to ensure long system life.
Stable viscosity and thickening property improve the convenience of production preparation and control the foam better.
Various specifications of aqueous solution, support TANK transport, easy operation.
-
Trimethylolpropane trioleate (TMPTO)
Polyol ester — Trimethylolpropane trioleate, TMPTO
CAS No.: 57675-44-2
Type: RJ-1453 (46#), RJ-1435 (68#)
Molecular Formula: CH3CH2C(CH2OOCC17H33)3
Appearance: Colorless or light yellow transparent liquid
Chemical Properties: Trimethylolpropane trioleate (TMPTO) is a colorless or yellow transparent liquid. TMPTO not only has good lubricating properties, but also has good biodegradability and no pollution to the environment. It is the earliest lubricant used. It has a wide range of liquids, excellent lubricating properties, high viscosity index and excellent thermal stability, low volatility, low temperature properties, etc. Green lubricant TMPTO has great market potential. -
Pentaerythritol tetraoleate (PETO)
Polyol ester — Pentaerythritol tetraoleate, PETO
CAS No.: 19321-40-5
Type: RJ-1454
Molecular Formula: C(CH2OOCC17H33)4
Appearance: Light yellow transparent liquid
Chemical Properties: Pentaerythritol oleate is a light yellow transparent liquid, and it is made by the reaction of pentaerythritol and oleic acid through a special post-treatment process. It has excellent lubricating properties, high viscosity index, good flame resistance, and the biodegradation rate is over 90%. It is an ideal base oil for 68 # synthetic ester type flame-resistant hydraulic oil. -
Neopentylglycol Dioleate
Polyol ester — Neopentylglycol Dioleate
Type: RJ-1423
Appearance: Light yellow transparent liquid
Chemical Properties: RJ-1423 is a kind of ester compound with excellent performance. It has excellent viscosity-temperature characteristics, good low temperature characteristics, high temperature stability and low volatility, so it can meet higher lubrication requirements and is widely used in metal Base oil for machining such as cutting and wire drawing. -
Neopentyl Polyol Ester
Saturated Polyol ester — Neopentyl Polyol Ester, NPE
Type: RJ-1408, RJ-1409
Appearance: Colorless or yellowish transparent oily liquid
Chemical Properties: Neopentyl polyol esters have excellent high and low temperature properties, high flash point and low pour point. It can be used as type II aircraft engine oil, high temperature chain oil, synthetic air compressor oil and refrigerating machine oil base oil compatible with environmentally friendly refrigerants; it can also be formulated with polyα-olefin oil to improve the rubber It has the defects of shrinkage and poor compatibility with additives. It is used as a base oil for internal combustion engine oil, gear oil and other oils. -
Isooctyl stearate
Monoester — Isooctyl stearate
Type: RJ-1651
Appearance: Colorless to light yellow transparent oily liquid
Chemical Properties: RJ-1651 has the characteristics of good wettability of isooctyl ester, which can provide very good lubricity in pure oil processing, and also provide permeability of processing fluid, such as high-speed cutting, drilling, punching, etc. In addition, it is a clean-burning, biodegradable synthetic ester, widely used as base oil and additive in pure oil, especially suitable for metal cutting fluids, and has good annealing cleanliness in rolling fluids. What is different from isooctyl oleate is that this material itself has no iodine value. It has very strong anti-oxidation ability in high temperature and harsh processing. In addition, the viscosity is close to No. 10 white mineral oil, so the base oil for semi-synthetic processing fluid is very emulsified. It also provides good lubricity and does not generate coke-like substances.
