Others
-
Tetraacetylethylenediamine (TAED) CAS 10543-57-4
Product name: Tetraacetylethylenediamine (TAED)
CAS No.: 10543-57-4
EINECS No.: 234-123-8
Molecular formula: C10H16N2O4
Molecular weight: 228.24
White/Green/Blue powder. It is an efficient low-temperature oxygen-based bleaching active agent
-
Methyl myristate CAS 124-10-7
Product name: Methyl myristate
CAS No.: 124-10-7
Density (at 20℃): 0.855 g/mL at 25 °C(lit.)
Solouble in (10%,at25℃): Pentamethylfuranbromate is a colorless and transparent liquid at normal temperature and pressure. Due to the low melting point of pentamethylfuranbromate, it will be in a semi-solid, semi-liquid or fully solid state when the ambient temperature is low. However, it can be dissolved in common organic solvents such as ethanol, ethyl acetate, dichloromethane and low-polarity ether solvents
Molecular Formula: C15H30O2
Molecular weight: 242.4
-
Methyl stearate CAS 112-61-8
Product name: Methyl stearate
CAS No.: 112-61-8
Density (at 20℃): 0.85g/cm3
Solouble in (10%,at25℃): It is soluble in organic solvents such as methanol, ethanol,mineral oil and DMSO
Molecular Formula: C19H38O2
Molecular weight: 298.5
-
Methyl decanoate CAS 110-42-9
Product name: Methyl decanoate
CAS: 110-42-9
Molecular Formula: C11H22O2
Molecular weight: 186.29
-
Methyl Octanoate CAS 111-11-5
Product name: Methyl Octanoate
CAS: 111-11-5
Molecular Formula: C9H18O2
Molecular weight: 158.24
-
Fluorine-removal agent
Fluorine-removal agent is an important chemical agent that is widely used to treat fluoride-containing wastewater. It reduces the concentration of fluoride ions and can protect human health and the health of aquatic ecosystems. As a chemical agent for treating fluoride wastewater, fluorine-removal agent is mainly used to remove fluoride ions in water.
It also have the following advantages:
1. The governance effect is good. Fluorine-removal agent can quickly precipitate and remove fluoride ions in water with high efficiency and no secondary pollution.
2. Easy to operate. Fluorine-removal agent are easy to operate and control, and have a wide range of applications.
3.Easy to use. The dosage of defluoridation agent is small and the treatment cost is low.
-
Sodium Aluminate (sodium Metaaluminate)
Solid sodium aluminate is one type of strong alkaline product appearing as white powder or fine granular, colorless, odorless and taste-less, Non flammable and non explosive, It has good solubility and is easily soluble in water,quick to clarify and easy to absorb moisture and carbon dioxide in the air. It is easy to precipitate aluminium hydroxide after dissolution in water.
-
Trimethylmethoxysilane (TMSOME) CAS 1825-61-2
Product name: Trimethylmethoxysilane (TMSOME)
CAS No.: 1825-61-2
EINECS No.: 217-369-0
Molecular formula: C4H12OSi
Molecular weight: 104.223
- InChI：InChI=1/C4H12OSi/c1-4(2,3)5-6/h1-3,6H3
Colorless and transparent liquid, it is a highly hydrophilic organic compound that can form an emulsion in water. It can react with inorganic or organic substances, undergo esterification reactions with alcohols, and react with acid anhydrides to form esters. -
3 3 3-Trifluoropropylmethyldimethoxysilane CAS 358-67-8
Product name: 3,3,3-Trifluoropropylmethyldimethoxysilane
CAS No.: 358-67-8
EINECS No.: 206-619-4
Molecular formula: C6H13F3O2Si
Molecular weight: 202.25
Structure:
Colorless transparent liquid, toxic by inhalation. Boiling point is 96.5℃ (100.12 kPa). Relative density is 1.0954. Refractive index is 1.3576. Easily hydrolyzed, releasing methanol and generating a condensation product of 3,3,3-trifluoropropyl methyl siloxane. Reacts with organometallic compounds. The methoxy group in the Si-OCH3 bond can be replaced by corresponding organic groups. It can be prepared by the reaction of 3,3,3-trifluoropropyl methyl dichlorosilane with anhydrous methanol. It is used to synthesize fluorine-containing organic silicon intermediates and fluorine-containing high molecular compounds with oil resistance and solvent resistance. -
(3,3,3-TRIFLUOROPROPYL)TRIMETHOXYSILANE CAS 429-60-7
Product name: (3,3,3-TRIFLUOROPROPYL)TRIMETHOXYSILANE
CAS No.: 429-60-7
EINECS No.: 207-059-3
Molecular formula: C6H13F3O3Si
Molecular weight: 218.25At normal temperature and pressure, it is a colorless liquid. Trifluoropropane trimethoxysilane is a silane reagent and is sensitive to water. -
Methyltris(methylethylketoximino)silane (MOS) CAS 22984-54-9
Product Introduction
Product name: Methyltris(methylethylketoximino)silane (MOS)
CAS: 22984-54-9
EINECS: 245-366-4Molecular Formula：CH3Si［＿O＿N = C］3C2H5
Molecular Weight：301.5
-
Hydroxylamine Hydrochloride CAS 5470-11-1
Product Introduction
Product name: Hydroxylamine hydrochloride
CAS: 5470-11-1
EINECS: 204-820-1Molecular Formula：NH2OH•HCl
Molecular Weight：69.49
UN No.：2923
