Coking defoamer

Short Description:

Product name: Coking defoamer

The BR03-101 coking defoamer can effectively remove the foam produced by oil and gas in the delayed coking unit. It can obviously improve the coking rate and quality of the coking tower and stabilize the operation of the coking tower. At the same time, because the silicon content of the agent is very low, it has no adverse effect on the subsequent hydrogenation section.

Send email to us

Product Detail

Product Tags

Specification

Appearance	colorless or light yellow homogeneous liquid
Solubility	soluble in hydrocarbon solvents
Density(20℃)/g/cm3	3 0.850 ~ 0.950
ph(25℃)1% aqueous solution	≥8.0
Freezing Point/℃	≤0
Closed flash point, ℃	≥ 61

Purpose

For delayed coking unit, eliminate coke tower foam.

Usage and dosage
The recommended dosage is 5 ~ 30 µ g / g. the defoamer is pumped into the four-way valve of the coking tower by the metering pump and enters the coking tower together with the bottom feed or the top of the tower together with the quench oil.

Packaging and storage

Packed in 200l iron drums, away from fire source, stored in cool and dry warehouse.
The shelf life is 24 months.